Moto Trips logo

Specification APRILIA TUONO V4 – 2021

aprilia tuono v4

Dive into a world of extraordinary experiences with the Aprilia Tuono V4 2021 – a motorcycle that combines sporty power with everyday comfort. With a heart beating from an impressive 1077 cm³ engine delivering 175 HP, every turn becomes a true feast for the senses. The Tuono V4 delights not only with its performance but also with its modern design that catches the eye and transforms every ride into an unforgettable experience. Its advanced technologies, including electronic riding assistance systems, allow you to enjoy its full potential while ensuring safety and confidence in handling. Discover what true freedom on two wheels means – we invite you to explore the full specifications of the Aprilia Tuono V4!

Advert

Logo Vin Info

Vehicle History Check

Technical Specifications aprilia tuono v4 2021

Engine

Engine Capacity (cm³) 1077.0
TypeV4, four-stroke
DetailsLongitudinal 65° V-4
Bore × Stroke (mm)81.0 x 52.3
Compression13.6:1
Valves/Cylinder4
Max RPM-

Performance

Power (HP) 175.0
Power (kW)11000
Torque (Nm)121
Peak Torque (RPM)9000
0-100 km/h (s)-
1/4 Mile (s)-
Top Speed (km/h)-

Transmission

Gearbox6-speed
Final DriveChain (final drive)
ClutchMultiplate wet clutch with mechanical slipper system.
DrivelineStraight cut gears and integrated flexible coupling, drive ratio: 73/44 primary drive. Chain 42/16 final drive.

Fuel & Emissions

Fuel SystemInjection. Airbox with front dynamic air intakes. 4 Weber-Marelli 48-mm throttle bodies with 4 injectors and latest generation Ride-by-Wire engine management that the rider can select on the fly: T (Track), S (Sport), R (Race).
Fuel ControlDouble Overhead Cams/Twin Cam (DOHC)
Fuel Consumption (l/100 km)7,71
Fuel Capacity (l)18,5
Reserve Fuel (l)4
Oil Capacity (l)-
CO₂ Emissions (g/km)178,9
Emission DetailsEuro 4
Exhaust System4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with ECU-controlled bypass valve and integrated trivalent catalytic converter (Euro 3)

Chassis & Suspension

Frame TypeAluminium dual beam chassis with cast and pressed sheet elements. (Sachs steering damper on APRC version)
Rake Angle (°)27.0&deg
Trail (mm)100 mm (3.9 inches)
Front SuspensionSachs upside-down ”œone by one” fork, Ø 43 mm stanchions. Forged aluminium radial calliper mounting bracket. Completely adjustable spring preload and hydraulic compression and rebound damping.
Front Wheel Travel (mm)117 mm (4.6 inches)
Rear SuspensionDouble braced aluminium swingarm mixed low thickness and sheet casting technology. Sachs monoshock with piggy-back, fully adjustable in: spring preload, hydraulics in compression and rebound. APS progressive linkages.
Rear Wheel Travel (mm)130 mm (5.1 inches)

Dimensions & Weight

Dry Weight (kg)185
Total Weight (kg)209
Power-to-Weight Ratio0,9459
Seat Height (mm)825
Overall Height (mm)1090
Overall Length (mm)2070
Overall Width (mm)810
Wheelbase (mm)1450
Ground Clearance (mm)125

Wheels & Brakes

Front Tyre120/70-ZR17
Rear Tyre190/55-ZR17
Front BrakesDouble disc. ABS. Floating stainless steel discs with lightweight stainless steel rotor with 6 studs. Brembo radial callipers with 4 diam. horizontally opposed 32 mm pistons. Sintered pads. Axial pump master cylinder and metal braided brake hoses.
Front Brake Diameter (mm)330
Rear BrakesSingle disc. ABS. Brembo floating calliper.
Rear Brake Diameter (mm)220
WheelsCast aluminium wheels with 3 split spoke design.

Electronics

StarterElectric
InstrumentsAnalogue/digital
ElectricalFlywheel mounted 420W alternator with rare earth magnets.
Light-
Battery-
IgnitionMagneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and ”œstick-coil” type coils

Service & Maintenance

Lubrication SystemWet sump lubrication system with oil radiator and two oil pumps (lubrication and cooling)
Cooling SystemLiquid
Engine Oil-
Oil Filter-
Brake Fluid-
Coolant-
Spark Plugs-
Back to Model List