Moto Trips logo

Specification APRILIA RSV4 FACTORY SE 09 SBK 1100 – 2025

aprilia rsv4 factory se 09 sbk 1100

Get ready for an exciting journey into the world of racing motorcycles with the Aprilia RSV4 Factory SE-09 SBK 1100, model year 2025. This exceptional machine, powered by a mighty 1099 cm³ engine, generates an astonishing 217 horsepower, providing unparalleled experiences on the track and in urban traffic. The RSV4 Factory SE is not just a machine, but a true masterpiece of engineering that combines perfect performance with the latest technologies. With its lightweight construction and advanced suspension system, every corner will be pure pleasure, and the acceleration will make you feel adrenaline like never before. Get ready to become part of the legend – discover the full specifications and let yourself be swept away by this incredible machine!

Advert

Logo Vin Info

Vehicle History Check

Technical Specifications aprilia rsv4 factory se 09 sbk 1100 2025

Engine

Engine Capacity (cm³)1099
TypeV4, four-stroke
DetailsLongitudinal 65° V4
Bore × Stroke (mm)81.0 x 53.3
Compression13.6:1
Valves/Cylinder4
Max RPM-

Performance

Power (HP)217
Power (kW)13000 1.2260 HP/kg
Torque (Nm)125
Peak Torque (RPM)10500
0-100 km/h (s)-
1/4 Mile (s)-
Top Speed (km/h)-

Transmission

Gearbox6-speed
Final DriveChain (final drive)
ClutchMultiplate wet clutch with mechanical slipper system.
DrivelineStraight cut gears and integrated flexible coupling, drive ratio: 73/44 primary drive. Chain 42/16 final drive.

Fuel & Emissions

Fuel SystemInjection. Airbox with front dynamic air intakes. 4 Marelli 48-mm throttle bodies with 8 injectors and Ride-By-Wire engine management.
Fuel ControlDouble Overhead Cams/Twin Cam (DOHC)
Fuel Consumption (l/100 km)6,9
Fuel Capacity (l)17,9
Reserve Fuel (l)4
Oil Capacity (l)-
CO₂ Emissions (g/km)160.1 CO g/km. (CO2 - Carbon dioxide emission)
Emission DetailsEuro 5
Exhaust System4 into 2 into 1 layout, single oxygen sensor, lateral single silencer with ECU-controlled bypass valve and integrated trivalent catalytic converter (Euro 3)

Chassis & Suspension

Frame TypeAluminium dual beam chassis with cast and pressed sheet elements. (Sachs steering damper on APRC version)
Rake Angle (°)-
Trail (mm)105 mm (4.1 inches)
Front SuspensionSmart EC 2.0 electronically managed Öhlins NIX fork.  43 mm stanchions, with TIN surface treatment Aluminium radial calliper mounts, adjustable in hydraulic compression and rebound damping and spring pre-load.
Front Wheel Travel (mm)125 mm (4.9 inches)
Rear SuspensionUpside-down double braced aluminium swingarm Öhlins TTX monoshock with Smart EC 2.0 electronically managed piggyback, fully adjustable in: spring pre-load, wheelbase and hydraulic compression and rebound damping.
Rear Wheel Travel (mm)115 mm (4.5 inches)

Dimensions & Weight

Dry Weight (kg)177
Total Weight (kg)202
Power-to-Weight Ratio1,226
Seat Height (mm)845
Overall Height (mm)1090
Overall Length (mm)2055
Overall Width (mm)735
Wheelbase (mm)1436
Ground Clearance (mm)125

Wheels & Brakes

Front Tyre120/70-ZR17
Rear Tyre200/55-ZR17
Front BrakesDouble disc. ABS. floating discs with aluminium flange Brembo STYLEMA® 4-piston mono-block radial calipers Radial pump and metal braid brake pipe-
Front Brake Diameter (mm)330
Rear BrakesSingle disc. ABS. Brembo Ø 32 mm 2 isolated piston caliper Pump with integrated tank and metal braid pipe
Rear Brake Diameter (mm)220
WheelsForged aluminium wheel rims, fully machined, with 5 double spokes

Electronics

StarterElectric
InstrumentsTFT instrumentation
ElectricalFlywheel mounted 420W alternator with rare earth magnets.
LightTriple LED headlight with two lights that illuminate the inside of the turn, increasing visibility when cornering.
Battery-
IgnitionMagneti Marelli digital electronic ignition system integrated in engine control system, with one spark plug per cylinder and ”œstick-coil” type coils

Service & Maintenance

Lubrication System-
Cooling SystemLiquid
Engine Oil-
Oil Filter-
Brake Fluid-
Coolant-
Spark Plugs-
Back to Model List